Pricing
Pay for the metal and the machining.
Each ORMIXA product is CNC-machined from solid metal billet at our Guangzhou facility. Pricing reflects the materials, the machining time, the shipping path, and one operating margin.
- 1
- Operating margin
- 0
- Paint or plating
- 0
- Logos on the razor
Safety Razor
Vector
CNC-machined from TC4 titanium or 316L stainless steel. Standard DE blades. No proprietary lock-in. In our blade tests, two passes land an SS-to-DFS finish for most pairings.
From $119.00
Shop VectorMaterials
Three metals. No plating. No pot-metal cores.
Every ORMIXA product is solid metal throughout — CNC-machined from billet, not cast, not coated.
TC4 Titanium
Grade 5 titanium alloy. High strength-to-weight ratio, corrosion-proof. The light build — agile in hand, easy in a dopp kit.
TA2 Titanium
Commercially pure titanium. Used for Harbor brush handles. Anodized surface finishes that do not chip or flake under normal use.
316L Stainless Steel
Heavier than titanium with high corrosion resistance. The weight does the work — the razor’s mass applies the pressure so your hand doesn’t have to. Stand base is solid 316L at 585 g.
TA2 Titanium Line
No two alike. By physics.
Every TA2 handle goes through controlled thermal crystallization: the titanium grain responds to heat and grows its own surface pattern, formed at the grain-boundary level. The handle that ships to you exists exactly once — we couldn't repeat it if we tried.
One-of-one crystalline grain · pure-titanium substrate, no paint, no coating
See the TA2 LineShaving Brush
Harbor
TA2 titanium or 6061 aluminum handle. Badger or synthetic knot. Configure both in the builder.
Built for your order, cured 24–48h, shipped direct — 15–24 calendar days to a US door
From $39.90
Build Harbor
Choose Your Gear
Where to start
First safety razor?
The Vector’s head is mild-to-moderate — a 0.76 mm blade gap that forgives an imperfect angle instead of punishing it. Start with the 316L: its weight does the work so you don’t press.
Shop 316L Vector →Upgrading from a cartridge razor?
You’ve already done the math on cartridge refills. The TC4 Vector at 60 g is lighter than most cartridge handles, and it takes the single-blade format the industry has used for a century.
Shop TC4 Vector →Need a brush to match?
Harbor is built to order — pick the handle, pick the knot, and we install and cure the bond for 24–48 hours so it arrives ready to use out of the box.
Build Harbor →Support
Common questions
What blades does the Vector use?
Any standard double-edge (DE) blade. No proprietary cartridge.
How often do I change the blade?
Every 3–5 shaves for most people. Blades cost a few cents each, so the running cost stays far below cartridge refills (illustrative — depends on how often you shave).
Do you ship internationally?
We ship direct to the US, Canada, Australia, New Zealand, Singapore, and Japan.